Hot Stuff Stripper, 5 GL

A true no rinse stripper that rapidly penetrates and solubilizes floor finish. This product completely evaporates from the surface. Hot Stuff can be used with or without a floor machine.

Mop/Wet Vacuum Stripping System: Dilute in cold or mildly warm water from one part product to two parts water for heavily build-up or highly burnished finishes, to one part product to five parts water for normal build-up. Apply liberally with a mop to an area small enough so as not to allow product to dry and allow to stand for 3 to 5 minutes. Agitate with a mop and remove solution and old finish with a wet vacuum. Allow floor to dry thoroughly and apply new finish as directed by manufacture. If complete stripping is not accomplished, repeat the above procedure before re-application of new finish.

Floor Machine Stripping System: Dilute and apply product as above using a dilution of one part product with 4 to 10 parts water, varying according to build-up conditions. Product may be applied with mop or Automatic Scrubber. Allow to stand for 3 to 5 minutes, scrub with a rotary floor machine or automatic scrubber equipped with stripping pads. Remove solution and old finish per manufacture's recommendation.