Dixon Valve 4PS8 P-Series Thor Interchange Steel Coupler

DIXON, 4PS8, P-SERIES 1/2" THOR INTERCHANGABLE STEEL COUPLER 1" HOSE END BARB

CONSTRUCTION:

-Machined components are manufactured using solid bar stock.

-Nitrile (Buna-N) seals standard

-Phosphor Bronze retaining ring and spring maximize corrosion resistance and extend service life.

-Steel componentry is plated using ROHS Compliant Trivalent Chrome

-Zinc Cast sleeve

COMPATABILITY & INTERCHANGE DATA:

-Thor Finger-Lock Interchange

-Interchanges with Thor PHC-Series, National Series 'A' and Dixon Dual-Lock

SAFTEY NOTES:

-Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.

-Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.

-It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.